Inexpensive, reliable, simple, the hallmarks of the Helix system make it the best choice for low wind speed residential and commercial applications. The Savonius turbine based design catches wind from all directions creating smooth powerful torque to spin the electric generator. Mounted up to 35 feet high, in winds as low as 10 mph the Helix system creates electricity to power your home or business.

As the wind blows the long helical blade scoops catch wind from all directions forcing it through the turbine. The turbine generator is connected directly to your home and as electricity is generated your home is powered. If the wind isn’t blowing your home is powered by the energy grid as usual. If the wind is blowing strongly then your energy produced can exceed your energy consumed and, depending on your local utility, your meter can spin backwards rolling back your energy bill.

The S594 (patent pending) is a commercial scale system for applications on medium to large size buildings. The blade is 16 ft high and 4 ft in diameter with a monopole support for the top bearing. The system utilizes a direct drive permanent magnet generator which reaches rated power at 200 RPM. Power is sent through a Grid tie inverter for use onsite and back into the utility grid for net metering.

The S594 is designed for home or commercial applications, and works under conditions that were previously prohibitive. If your location fits the conditions below then the S594 will most likely work for you:

1 - Local zoning that permits small wind turbine installation.

2 - A site with adequate wind (greater than 14mph) and an installed height of at least 15 feet.

3 - An existing interconnection agreement with your local utility (to check the net energy meeting regulations in your state refer to this website: http://www.awea.org/smallwind/states.html

4 - Turbulent or gusty wind or wind that frequently changes direction.

Helix Wind energy systems are designed, engineered and tested at corporate facilities in San Diego and California. Each component is individually tested to ensure the system performs seamlessly as a whole. Our performance data is from real installed working turbines, not a theoretical power curve created on a computer.

Rated Capacity - 5 kW

Peak Power - 5.63 kW

Rotor Dimensions - 16’ h x 4’ w (4.87 m x 1.2 m)

Overall Height - 19.8’ (6.0m)

Swept Area - 5.88 m

Rotor Construction - Ultra tough Aluminum Alloy

Type - Vertical axis helical Savonius rotor

Cut-in Speed - 8 mph

Braking - No braking needed for normal operation. Manual override for maintenance.

Grid Connection - 110 VAC - 240 VAC, 50-60Hz Grid Tied Inverter.

Weight - 1400 lb (635.029 kg)

Design Life - 30 years

Installation -Roof Top: recommend 2 ft above roof line. *Consult with Helix Wind field engineers for optimum placement guidlines.

Warranty - 5 year Limited Warranty

Generator - 5 kw high efficiency Permanent Magnet Generator

Battery charge systems available

1 - Unique patent pending design.

2 - Rugged aluminum and steel construction for any environment.

3 - Modular, 3D blade for easy assembly and toughness.

4 - Helical turbine for smooth power production.

5 - Ultra reliable Low RPM Permanent magnet generator.

6 - Design gives almost silent operation at less than 5 decibels above background noise.

7 - Completely safe for our friends the birds and bats.

8 - Utilizes turbulent omni-directional air instantly, no yaw control required.

Annual Power Production

S322 Electrical Schematic:

Mounting For Comercial Applications

Urban Siting

VAWT Advantages