Multi Grid Inverter System
Since its foundation in 1981, the German company SMA Solar Technology AG
has introduced an accumulated total of 1GW from 400,000 of its units. With
main operations in Europe and the U.S., SMA is a global leader in innovative
development and manufacturing of renewable energy power supply systems by.
In collaboration with SMA, we have co-developed Windy Boy WB-1100LV, a multi
grid inverter exclusively for Airdolphin. The capacitor module CM-100 was
developed with JM Energy Corp's capacitor technologies and Zephyr's
expertise. This text explains the multi grid inverter system created by
combining the two units.
On a multi grid inverter, the generated output is leveled with the capacitor
module CM-100, then converted to AC200V through Windy Boy WB-1100LV, and
supplied to the power distribution grid. The generated power is used to
cover captive consumption through the power distribution grid, and the
excess electricity is sold back to the grid (during low electricity demands
at nights etc.). Since power generation is affected by wind conditions, this
system -- which can either consume or sell the generated power -- is a
highly efficient wind power generation.
For areas with no commercial electricity, a stand-alone system can be built
using Sunny Island and a battery.
SMA Solar Technology AG is a manufacturer specializing in innovative
inverters, based in the environmental country Germany.
"SMA Solar Technology AG"
Importer and seller of SMA products: Zephyr
Capacitor Module/CM-100
|
|
 | Capacitor module exclusively for Airdolphin grid system |
 | Minimum internal resistance allows sudden charge-discharge by
high current |
 | Stable interconnected power by absorbing and releasing volatile
peak generation from Airdolphin |
 | 10 serial capacitor cells in a module package |
 | Built-in capacitor over discharge protective function |
 | Input voltages DC 25 to 38V |
 | Built-in power-assist circuit for Airdolphin. Power input AC
100V to 240V (50Hz/60Hz) |
 | Reliable hardware with IP54 dust proof/water proof level |
 | Extended temperature rage of -20℃ to +60℃ |
 | Semipermanent operating life |
 | Co-developed withJM Energy |
|
Capacitor Module Specifications CM-100
| CM-100 |
| Capacitor Section |
|
| Capacitance |
100F |
| Input Voltage |
DC25V |
| Input/Output |
DC50A |
| Power Section |
|
| Input Voltage |
AC 100 to 240V |
| Input Current |
AC1.4A |
| Frequency |
50/60Hz |
| Dimensions |
363×190×120mm |
| Weight |
6.6kg |
| Ambient Temperature |
-20℃ to +60℃ |
| Accessories |
Attachment plate x 2 |
| Operating Voltage |
DC 25 to 38V |
| Over Discharge Protective Voltage |
DC22.5V±1V |
| Max. Battery Charging Current |
100A |
| Max. Discharge Current |
100A (at over DC 25V) |
| DC Internal Resistance |
less than 50mohms (25℃, 5A) |
| Charge/Discharge Capacity 1300F V
Voltage |
1300F V |
| Dust Proof/Water Proof Level |
IP54 |